Corner Wall repair Banner

Corner Repair

Corner Repair

CORNER WALL REPAIR

Rhino Carbon Fiber® also offers the most advanced corner repair solution available. The corner repair kits are great to reinforce the corner of the structure. Many structures have a beam that pockets over the top of the corners of the foundation wall. These areas have a tendency to crack due to the pressure and weight of the beam. The Rhino Carbon Fiber® corner kits can repair a cracked corner or reinforce a wall to prepare for an addition.

Rhino Carbon Fiber® is the only system that structurally repairs and reinforces the corner of your foundation wall and prevents future cracks. Carbon fiber actually strengthens the wall itself. With the corner kit it distributes the pressure horizontally to correct the damage and prevent any future damage. It has a smooth, flat finish that blends in with the existing wall and can be easily painted or covered with wall board. All Rhino Carbon Fiber® products have a lifetime, transferable warranty.

carbon fiber straps

Corner repair installation

In just 5 easy steps


Preparation marking corner repair illustration of a wall with rhino carbon fiber

1PREPARATION

a. Measure wall height and mark center for location of middle strap

b. Measure 18 inches up from middle strap for location of top strap

c. Measure 18 inches down from middle strap for location of bottom strap

d. Measure 5' in both directions from peak of the corner on each strap location

Tools Marker and Measuring Tape


Grinding corner repair

2GRIND

a. Grind 5 feet along each side of the wall starting at the corner

The width of the grinding should be the same thickness of the block (use existing mourder joints as your guide line)

c. You must follow al EPA guidelines

Visit epa.gov/getleadsafe for all guidelines

Tools Grinder, shop vacuum and safety glasses


epoxy corner repair

3EPOXY PREP (Opt)

a. Apply strips of tape to the wall between each prepped area

Tools Tape, Sissors


Mount corner repair 1 Mount corner repair 2 Mount corner repair 3 Mount corner repair 4

4MOUNT

a. Starting with top of the wall apply epoxy to both sides of the wall

b. Mount carbon fiber to the wall keeping it as straight as possible (fold carbon fiber accordian style style to help with the unraveling while to the wall)

c. Using a plastic scraper or and and work carbon fiber into epoxy to ensure proper saturation

d. Repeat process for the other additional sections of your corner wall

Tools Gloves, caulk gun, carbon fiber, epoxy and plastic scraper (opt)


Clean up corner repair

5CLEAN UP

a. Once epoxy is dry remove tape

a. Walls can then be painted over for asthetic purposes

Tools Gloves


CORNER REPAIRS USING RHINO CARBON FIBER VIDEO


CARBON FIBER INSTALLATION

CARBON FIBER INSTALLATION

INSTRUCTIONS

CRACK INJECTION INSTALLATION

CRACK INJECTION INSTALLATION

INSTRUCTIONS

STAPLE INSTALLATION

STAPLE INSTALLATION

INSTRUCTIONS